Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it happens to all spa owners at one time or another; water is among nature’s most erosive substances. Moisture permeates in and becomes trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, moist environment is perfect for mold and mildew and other forms of foul-smelling stuff.
If moisture has actually penetrated further into the cling wrap foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, however also make the cover really difficult to get rid of, and not as reliable at keeping the heat in the spa. Time for a better kind of Swim Spa Cover

Foul-smelling Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or used areas, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off correctly, will eventually begin to puddle water, which is most likely time to buy a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is likewise bad news, and although you can fend off the inescapable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can stand up to longer periods, but it’s an excellent routine to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to permit moisture to escape do so, however do not remove delicate foam panels unless absolutely required.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, however it won’t stop moisture very well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real solution is a Swim Spa Cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not preserved routinely with sanitizer and filtering, or is not stunned typically enough, germs and algae can make the most of a congenial environment to grow. Low pH, high chlorine or high ozone levels can also degrade the underside of your Swim Spa Cover cover. Since the cover is so near to the spa, it absorbs the chemistry of the spa. Tidy, clear and hygienic water is the best environment to prevent foul-smelling spa covers. (Sorry however this is simply BS) The reality is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times per year, so that it always looks fantastic, and is safeguarded from the elements. Once again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealership pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your Swim Spa Cover!
• Remove to Safe Location: This primary step may seem obvious, however you need a great place to enable the cover to sit undisturbed from pets, wild animals, and winds. It must be a sunny place if possible, or a dry indoor place with low humidity can also be used.
• Deodorize & Disinfect: You may not have to do both, it’s best to be as gentle as possible. Don’t use home cleaning products on your Swim Spa Cover, odd chemicals can end up in your spa water. Gently clean all exterior surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this need to be avoided if possible, because the panels could become damaged during removal or cleansing. But if you identify that there is something slimy inside, you can typically unzip and remove the panel for a cleansing inside and out.

How typically does your spa dealer anticipate you to do all this? If your swim spa is safeguarded from most sun and rain, twice per year. If it’s visible it must be 3-4 times annually. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The easiest treatment for a foul-smelling Swim Spa Cover is to just buy a various type of Swim Spa Cover A stinky swim spa cover just suggests that your cover is taking on wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has actually sealed air chambers rather will avoid providing the mold and mildew a place to grow in the first place.